How to Fix Common Canon Printer Errors
While working with a Canon printer, it is certain that one may face a paper jam and various other issues. This may happen with any Canon printer. In order to solve the problem, we have described the steps below. Read the solutions to such issues and fix them in quick and easy steps.
Fix
Canon Printer Error E05
Error code E05 is an
error that can be due to the printer being dirty. In such a situation, your
Canon printer will not be able to detect the ink. You need to clean your
printer carefully and install the cartridges again. The problem will quickly be
fixed.
Fix
Canon Printer Error E16
The E16 error is not
serious. Whenever the E16 error appears, you don’t need to get worried. You see
the error when there is not sufficient ink in the cartridge. All you need to do
is just replace the cartridge with a new one and put the cover. Start printing
again.
Fix
Canon Printer Error 6000
In case you have
encountered the error 6000 on your Canon printer, you can fix it quickly by
following the steps mentioned below:
Reset
your Canon printer
1. Unplug your Canon printer from the power
source and keep it in a pause mode for a few minutes.
2. Now, plug in the printer again and turn it
on. After that, press and hold the “power button for a few seconds and
press the “Stop” button twice.
3. Repeat this process once or twice. This may
fix the issue.
Clean
your Canon printer to fix error 6000
1. First and foremost, clean the loading tray,
Open the printer lid and find the paper tray.
2. Pull the stuck papers in the paper tray.
3. After removing all the papers, take the paper
tray out.
4. Now, clean it with a soft cloth and install
the paper tray properly.
5. Insert the papers back, and then restart the
printer.
Fix Canon Printer
Error E07
The error E07 may
happen with any Canon printer. The error appears when the cartridge is not
installed in the right position. To fix the problem, check the position of the
cartridge and take out the cartridge. Reinstall it again properly.
Fix
Canon Printer Error E03
When your Canon
printer displays error E03, the paper may get stuck inside your printer. in
order to fix the problem, you need to remove the jammed papers and press the OK
button. Doing so will fix the issue.
Remove
Any Paper Stuck in the Paper Tray
1. First, remove any loose paper from the paper
tray.
2. Hit the Resume button on the front of the printer.
3. Remove stuck paper one sheet at a time.
4. Check for any remaining pieces of paper in the
paper tray.
5. When you have cleared the paper jam, your
Canon printer will start functioning well.
Note: Keep in mind that some printers have two
access panels. Follow the instructions to clear a paper jam from the rear of
your printer.
Remove
Rear Access Panel
1. Search for the Knob or Access tab located on
the backside of your Canon printer. It may be a knob or a button. If it is a
knob, you can move it to unlock it.
2. Now, you need to remove the panel and pull out
the jammed papers.
3. Clear the pieces of paper and do it carefully.
4. Replace the rear panel safely.
Conclusion
The purpose of the
article was to let you know about the effective ways to resolve Canon printer
errors. We have described several effective solutions in the article. We hope
one of these solutions will prove helpful to you.
My name is John, and I am a blogger and graphic
designer with extensive experience. I offer online services to a variety of
clients across the globe. You can read my blogs just a single click on the
given link : Canon.com/ijsetup
Source : How to
Fix Common Canon Printer Errors
Comments
Post a Comment